|
STRAIGHT LINE SPORTS |
|
|
P.O. Box 172, Gander, Newfoundland, Canada, A1V 1W6 |
|
|
Tel: (011 0) 1-709-256-3533 |
Fax: (011 0) 1-709-256-3586 |
|
Catalogs
Blank Printable order forms: Microsoft
Word;
Excel; and PDF. |
|
Straight Line Sports P.O. Box 172 Gander, Newfoundland Canada A1V 1W6 Tel: (011 0) 1-709-256-3533 Fax: (011 0) 1-709-256-3586 July & August Contact us at: Sheppard’s Store 316 Veteran’s Drive Cormack, Newfoundland Canada A8A 2R4 Tel: (011 0) 1-709-635-7106 Fax:
(011 0) 1-709-8111 | |
|
July & August:
SHEPPARD'S STORE 316 Veteran's Drive, Cormack Newfoundland, Canada,
A8A 2R4 | |||
|
Tel:
(011 0) 1-709-635-7106 |
Fax: (011 0) 1-709-635-8111 | ||
ROD BUILDING HINTS
* Always work in a clean well-lighted area.
* Follow directions for rod building and use professional finishes.
* If you have a rod-building question or comment, please give us a call 1 (709)
256-3533 or July and August 1 (709) 635-7106. We enjoy calls, questions, and
suggestions from rod builders.
HELPFUL TIPS FOR A PROFESSIONAL FINISH
* For a professional finish use an epoxy finish.
* If you wish to preserve the thread color, us a color preserver. Two
applications with a one-hour drying time between coats.
* Heat both the containers A and B prior to mixing and application. Do not heat
above 80 o F to 90 o F. On warm days heating will not be necessary.
* Accurately measure equal amounts of Resin A and Hardener B with separate
syringes and place into a non-porous mixing cup.
* To mix the two parts, use rounded non-porous mixing stirrers.
* Mix the two parts slowly (to avoid bubbles) and thoroughly (two minutes or
more) until clear.
PROBLEMS
* If crazing and cracking occurs around the guides become a problem, consider
finishing without first coating the windings with a color preserver.
* To avoid air bubbles, do not mix rapidly. Avoid the use of paper cups, wooden
stirrers. Heat both parts A and B prior to mixing.
* Avoid contamination with Silicone. Silicone in medical syringes. Silicone can
cause the finish to fisheye or separate from the rod blank and wrappings.
* Unequal mix of A and B results in an uncured, "sticky" finish. To
correct, recoat the wraps with a new coating of properly finish. If this does
not work, remove the old finishes, clean, and recoat.
* Yellowing of the finish can result from a reaction of the epoxy finish with a
lacquer-based color preserver, incomplete mixing or unequal portions of A and B.
* If epoxy Resin A crystallizes, restore by heating the resin bottle in hot (not
boiling) water.
* Syringes should not be cleaned, just wiped clean and placed into a separate
storage bag. Keep the plungers of the syringes halfway to prevent sticking.
Clean up all brushes and containers with acetone or lacquer thinner or epoxy
thinner in a well-ventilated area or outdoors.
|
GUIDE SPACING FLY ROD (from tip in inches) |
||||||||||
|
6 ft |
4 |
9 |
15 |
22 |
30.5 |
42 |
|
|||
|
7 ft |
4 |
9 |
15 |
22 |
30 |
40 |
52 |
|
||
|
7 ft 6 in. |
4 |
9 |
15 |
22 |
30 |
39 |
49 |
59 |
|
|
|
8 ft |
3.5 |
7.5 |
12.5 |
18.5 |
25.5 |
33.5 |
42.5 |
52.5 |
|
|
|
8 ft 6 in. |
3.5 |
7.5 |
12.5 |
18.5 |
25.5 |
34 |
44 |
56 |
70 |
|
|
9 ft |
3.5 |
7.5 |
12.5 |
18.5 |
25.5 |
33.5 |
42.5 |
52.5 |
63.5 |
76 |
| A: | R: | ||||
| B: | |||||
| C: | |||||
| V: | |||||
| H: | W: | ||||
| G: | T: | ||||
| P: | |||||
|
|
|||||
| Index | |||||
|
Titanium A10ST$12.50 |
Struble D3130 $25.35 |
|
Struble U3210 $33.35 |
Struble U9350 $58.50 |
|
Graphite G16 - Black - Stainless $4.25 |
Graphite G16 Black - Gold $5.75 |
|
GSK - Skeleton $5.75 |
|
|
Butt Cap B16B - Black $0.30 |
Butt Cap FBCT $2.00 |
|
Fighting Butt F2MB-2 $13.50 |
|
|
Index |
|
|
Pistol Grip $12.00 |
Graphite Triggered (Gold or Silver) $8.00 |
|
Index |
|
|
CORK GRIPS - FLY |
|||
|
Cigar Shape |
$16.50 |
Double Well |
$16.50 |
|
Half Well |
$16.50 |
Small Front Taper |
$16.50 |
|
Double Well - Uplocking |
$20.00 |
Foam |
$6.95 |
|
Cork Front 4" |
$2.10 |
Rear 5" |
$2.35 |
|
GLC1 |
$22.00 |
GLC7 |
$16.00 |
|
Plastic 2" Diameter |
$8.00 |
Aluminum 1 3/4" Diameter |
$24.00 |
|
G. Loomis 1 3/4 in. Diameter |
$30.00 |
Rod & Reel Case - Combo |
$85.00 |
|
Regular Wire Hookkeepers (Black or Chrome) |
$0.75 |
Gold Hookkeepers |
$1.60 |
|
Winding Check |
$0.50 |
|
|
|
Color Preserver |
$2.00 |
Professional Finish |
$5.20 |
|
Rod Varnish |
$2.75 |
Flex Coat F2S |
$12.75 |
|
Flex Coat F2SL |
$13.25 |
|
|
|
Rod Bag |
$13.49 |
Epoxy Solvent |
$2.00 |
|
Measuring Syringe |
$0.75 |
Rod Building Brush |
$0.75 |
|
Rod Turner Motorized |
$100.00 |
|
|
ROD BUILDING KITS
Order according to rod length and line weight
Loomis Frontier $240.00
CUSTOM BUILT FLY RODS LIFETIME SERVICE WARRANTY
Specify length and line weight for fly rods.
G. Loomis GL2 $350.00
G. Loomis GL3 $350.00
G. Loomis Frontier $300.00
* Kits do not include
* Color Preserver
* Flex Coat Finish
* Rod Bag
|
WINDING THREAD GUDEBROD NYLON - NCP Size "A" 50 yd. $1.50 1 Oz. $10.50 |
|||||
|
Black - 001 |
Spring Green - 105 |
Orange -221 |
Tan - 290 |
Dk. Brown - 396 |
Chestnut - 5274 |
|
White - 002 |
Sunburst - 200 |
Dark Blue - 245 |
Scarlet - 326 |
Pink - 411 |
Dark Green - 5896 |
|
Blue - 037 |
Garnet - 206 |
Rust - 257 |
Apple Red - 335 |
Char. Grey - 602 |
Green - 6779 |
|
Cobalt Blue - 050 |
Golden - 209 |
Blue Dun - 272 |
Maroon - 337 |
Purple - 468 |
|
| Index | |||||
|
WINDING THREAD NYLON REGULAR Size "A" 50 yd. $1.35 1 Oz. $10.00 |
|
|
Black/Gold - 001G |
White/Gold - 002G |
Blue/Gold - 245G |
Red/Gold - 326G |
Green/Gold - 5896G |
Tan/Gold - 6000G |
|
Black/Silver - 002S |
White/Silver - 002S |
Blue/Gold - 245S |
Red/Silver - 326S |
Green/Gold - 5896S |
|
|
METALLIC THREAD Size "C" 40 yd. $2.25 1 Oz. $14.00 |
|||||
|
Gold - 9000 |
Gold - 9004 |
Green - 9358 |
Black - 9001 |
Lime Green - 9105 |
Copper - 9396 |
|
Silver - 9002 |
Royal Blue - 9245 |
Bronze - 9541 |
Pearl - 9003 |
Red - 9396 |
|
